Vertical blinds are a widespread window treatment option that offers a flawless combination of style and functionality. They are versatile, easy to use, and can be customized to fit any window size or shape. However, the thought of installing vertical blinds can be daunting, especially for those who have never done it before. So, here I will provide you with a step-by-step guide on how to install vertical blinds. You’ll need Vertical blinds kit for installation which includes mounting brackets, screws, valance clips, and installation instructions.
Measure the Window
The first step in installing vertical blinds is to measure the window accurately. Use a measuring tape to measure the height and width of the window frame. You need to make sure to measure both the inside and outside of the frame, as the blinds can be installed either way. Write down the measurements, as you will need them when selecting the right size blinds.
Choose the Right Size Blinds
Select the right size vertical blinds, based on your measurements. Most blinds come in standard sizes, so make sure to choose one that is slightly smaller than the width and height of the window frame. This will ensure that the blinds fit perfectly without obstructing the window.
Mount the Brackets
Once you have the right blinds, it’s time to mount the brackets. Start by marking the positions where you want to mount the brackets on the top of the window frame. Use a level to ensure that the brackets are level and then drill pilot holes for the screws. Next, attach the brackets using screws and a screwdriver. Make sure that the brackets you used are secure and can hold the weight of the blinds.
Install the Valance Clips
Most vertical blinds come with valance clips that attach to the headrail. To install the valance clips, slide them onto the headrail and snap them into place. Make sure that the valance clips are aligned and evenly spaced.
Attach the Headrail
Attach the headrail to the brackets by sliding it into place. Make sure that the headrail is smooth and secure. Once attached, test the blinds by sliding them back and forth to ensure that they move smoothly and evenly.
Install the Vanes
Finally, it’s time to install the vanes. Begin by removing the vanes from the packaging and laying them out on a flat surface. Next, slide the hooks on the top of each vane into the carriers on the headrail. Make sure that the vanes are evenly spaced and aligned.
Adjust the Length
You can adjust the length by removing the excess slats from the bottom of the headrail if the vertical blinds are too long for the window. To do this, remove the bottom cap from the headrail and slide out the excess slats. Once removed, reattach the bottom cap.